| Boilers, Pressure Parts & Axuliaries |
 |
Solid Fuel Fired Boiler: (Range-5:120 tph @ 10.5-105 kg/sq.cm and 520 deg. c) |
| |
These Boilers have been designed to fire with various solid fuels. The selection of firing system depends upon the type of fuel to be fired. Various types of fuel that can be fired are Lignite Coal, Rice Husk, Groundnut Husk, Mustard Husk, Baggasse, Saw-Dust, Biomass/Agro-Waste Fuels, MSW/RDF etc. Other fuel fired Boilers can also be offered on request. Various types of firing systems that are adopted are:
 |
Fluidised-Bed |
|
Pulsating Grate |
|
Spreader Stroker |
|
Travelling/Chain Grate etc. |
|
Dumping Grate |
|
|
depending upon the characteristic of fuel to be fired or the fuel feeding arrangement selected. |
|
Oil and Gas Fired Boilers : (Range-5:80 TPH @ 10.5-105kg/sq.cm and 520 deg.C) |
| |
These Boilers have been designed to be fired with oil and gas in modular construction for LDO, LSHS, FO, Gas, BF/CO Gas etc. |
| |
|
|
Waste Heat Recovery Boilers : (Range: Depending upon waste heat available and waste gas characteristic) |
| |
These Boilers have been designed to produce steam by recovering waste heat from DRI Kilns, BF Gases, Coke-Oven Batteries and other sources.
For all the above range, D.V.Steel Industries Pvt. Ltd. designs and manufactures boilers as per applicable National / International Standards and Codes. Boilers offered are with standard accessories like Deaerator, Soot Blowers, Instruments, Dosing System, Sampling System etc. |
| |
|
 |
Other Services Rendered For Boilers |
| |
Up gradation and Revamping of existing Boilers to increase efficiency and capacity, change of fuel, retrofitting of additional heat transfer zones. |
 |
| Material Handling Equipments |
| |
Designs and undertaking Fabrication, Erection & Commissioning of material handling systems such as Belt Conveyor, Bucket Elevators, Screw
Conveyors, Roller Chain Conveyors, Vibrating Feeder, Grizzly Feeder, Reciprocating Feeder etc. |
|
|
|
| Rock Processing Equipments |
| |
Design and manufacturing of various rock processing equipments like Jaw-Crusher, Vibrating Screens, Rotary Screens, Coal lmpactors and Ball-Mill |
|
| Pipe & Cylindrical Equipments |
| |
Manufacturing following range of Pipes and Cylindrical equipments as per customer specification.
|
MS Welded Pipes of 300mm (OD) and highly suitable for water and slurry pipe lines |
|
MS Ducting Pipes, Bend, Tees, Dampers and Expansion joints of larger diameters suitable for gas handling in Sponge Iron and other processing units. |
 |
MS Chimneys, both Self Supported and Rope Supported ranging from 400 mm diameter to 6000 mm diameter and up to a height of 90 m, suitable for Processing Industries and Power Plants. |
|
Shells and Casings for GCT/ GCP, ESP, Kiln, DSC, Stack etc. |
|
Furnace Shell, Ladles, Tundish etc. |
|
|
| Bulk Storage |
| |
Experienced in Fabrication and Erection of various range of MS storage facilities up to 200 kl. for liquid and 300 cu.m. for solid material storage like Under Ground and Over Head Tanks, Vessels, Bins, Bunkers, Silos, Hopper etc. |
|
| Lifting & Handling Equipments |
| |
Design and manufacturing of various types of Lifting and Handling equipments like EOT Crane, Gantry Crane, Derrick Crane etc. |
|
| Maching & Shaping |
| |
Unit has a medium range Machine Shop equipped with Centre Lathes, Shapers, VTL, HMB and Plano-Miller to cater to its machining requirements for equipment manufacturing. |
|
| Fabrication & Erection |
| |
Unit has an in-house facility to under take fabrication jobs up to 500 T and onsite facility to undertake fabrication and erection of around 500 tonnes per month |
| |
|
|
|
